-Measurement range Display type: pH: -1.00 - 15.00 (Temp: -5.0 - 100.0°C)
-Transmission output signal: Digital liquid crystal display instrument (equipped with LED backlight)
-Transmission output range: 4 - 20mA DC isolated, Max. resistance 650Ω or less.
Adjustable (0.01pH steps). Minimum width of 2pH.
-Alarm (control) contact output:
+Output contacts: 2 contacts (upper and lower limits can be set freely) a-contacts
+Contact capacity: 250V AC, 3A or less (resistive load)
+Contact function: selectable from upper and lower limit operation (ON/OFF control, adjustable sensitivity setting) and Under maintenance/Under cleaning/Failure alarm.
-Performance:
+Linearity: ±0.03pH or less (using equivalent input)
+Repeatability: ±0.02pH or less (using equivalent input)
+Response: 5 sec. for 90% response (factory setting)
-Power requirements/Power consumption: 100 - 240V AC, ±10% 50/60 Hz ∙ approx. 6VA (100V AC)
-Ambient conditions: -10 - 50°C 0 - 90% RH
-Dimensions/Weight: 96 (W) × 96 (H) × 90 (D) mm (panel cut-out 92 × 92 mm) ∙ approx. 0.6kg
-Construction/Materials: Indoor-use installation type (IP20) ∙ Main unit: aluminum, Display: polyester resin
-Inluding:
1) Transmitter: HBM100B-0-A00B0
2) pH sensor holder: HC-763
3) pH sensor (5m lead): 5600-5F
4) pH calibration kit (4-7): 6531680K
Including:
+ pH4.01 solution 500ml: 143F191 (1ea)
+ pH6.86 solution 500ml 143F192 (1ea)
+ pH powder pH4.01 5bag/1set: 143F060 (1ea)
+ pH powder pH6.86 5bag/1set: 143F061 (1ea)