HOME // TECHNOLOGY // Environment
Code: #21417
Supplier: Met One Instruments, Inc.
Met One ES-642 Remote Dust Monitor
Measurement Principle:
Particulate concentration by forward light scatter laser Nephelometer
Available Cut Points:
TSP Inlet Standard. PM10, PM2.5, and PM1 sharp-cut cyclone inlets available.
Measurement Range:
0 to 100 mg/m3 (0 to 100,000 mg/m3)
Measurement Sensitivity:
.001 mg/m3.
Nephelometer Accuracy:
± 5% traceable standard with 0.6um PSL.
Particle Size Sensitivity:
0.1 to 100 micron.
Display:
2 X 16 backlit LCD. Provides concentration, flow and status information.
Zero Calibration:
Automatic Zero Calibration every hour or as programmed from 1 to 999 minutes.
Flow Rate:
2.0 liters/minute ± 0.1 lpm.
Input Voltage:
11 – 40 VDC
Power Consumption:
12 VDC = 300 mA (heater off), 1.2 A (heater on) 24 VDC = 140 mA (heater off), 0.6 A (heater on)
Analog Output:
4-20 mA and 0 – 10 VDC.
Serial Ports:
RS-232 and RS-485
Serial Protocols:
ASCII Text data format and MODBUS RTU.
Alarm Output:
Normally open and normally closed relay 30 VDC @ 1A maximum.
Operating Temperature:
-10 to +50°C. (Ambient Temperature Sensor Range -30 to +50°C).
Barometric Pressure:
600 to 1040 mbar pressure sensor range.
Ambient Humidity Range:
0 to 90% RH, non-condensing.
Intake Moisture Control:
Automatic 10 Watt inlet heater module controlled to sample RH set point.
Factory Serivce Interval:
24 Months typical, under continuous use in normal ambient air.
Mounting Options:
Mounting bracket standard (wall or 2” vertical mast). Optional EX-905 tripod.
Unit Weight:
2.7 kg (6.0 lbs.)
Unit Dimensions:
22.9cm high, 17.8cm wide, 10.8cm deep. (9.0” x 7.0” x 4.25”). w/out inlet assy. 48.3cm high, 17.8cm wide, 10.8cm deep. (19.0” x 7.0” x 4.25”). w/ inlet assy.
ACCU-REEL Professional water s...
Price: Call
JS Press-type Water Sampler
Mishimax® volume reduction sys...
ecoBuilding software
Priva Blue ID S-line controlle...
Priva Blue ID C-line Controlle...
Priva Analytic Software
Priva Comforte Building Climat...
Please enter a search keyword.