18.2 MΩ-cm Type 1 Water
Compact Type 1 water system, which can
be fed from a Geno, Puro or existing ringmain / RO system. This range of
bench-top or wall mounted water systems are specifically designed to
save laboratory space while providing high quality water that exceeds
all reagent water quality standards through its state-of-the-art water
purification technology.
- Up to 2 litres/min dispense rate
- Dual wavelength UV 185 and 254nm
- Dispense from the unit or from remote dispenser
- Volumetric or continuous control dispensing
- Novel dual cartridge pass mechanism for maximum quality
- SD card interface
- Real time TOC monitoring
- On-bench, under-bench, wall or reservoir-top mounting (brackets included)
- 24-hour circulation mode
- Resistivity meter to measure pre-treated and polished water
- Simple cartridge changing
- First consumables included with unit
- Variable speed quiet motor switches to energy saving mode when not in use
- Built-in automatic self-cleaning/sanitisation mechanism
PRODUCT WATER QUALITY
|
ASTM TYPE 1
|
|
MODEL
|
DISPENSE RATE (@15°C)*
|
AUTO VOLUMETRIC DISPENSE (@15°C)
|
PARTICLE CONTENT**
|
BACTERIA
|
TOC
|
ENDOTOXINS***
|
RNASE***
|
DNASE***
|
PROTEASE***
|
| ALTO TOC |
0.1 - 2L/min |
0.1 - 25L |
<0.22uF |
<1cfu/ml |
≤5ppb |
- |
- |
- |
- |
| ALTO TOC UF |
0.1 - 2L/min |
0.1 - 25L |
<0.22uF |
<1cfu/ml |
≤5ppb |
0.001EU/mL |
<1pg/mL |
<5pg/mL |
<0.15µg/mL |
* Depending on set pump output %
** Using TC004 or TC011
*** Using correct final filter TC004
SYSTEM REQUIREMENTS
|
FEED WATER
|
|
|
| Pressure |
Bar |
0.1 - 6 |
| Conductivity |
μS/cm |
<40 |
| Temperature |
°C |
4 - 30 |
| Hardness as CaCO3 |
ppm |
<20 |
| Free Chlorine |
ppm |
<2 |
| Colloid Index |
SDI |
<3 |
| pH Value |
|
4 - 10 |
| Iron (Total Fe) |
ppm |
<0.1 |
UNIT SPECIFICATIONS
|
ALL MODELS
|
|
| Dimensions (HxWxD) |
500 x 490 x 290mm |
| Installed Weight |
23kg |
| Power Supply |
100 - 240V ~; 50/60Hz; 3.0A (max) |
| Power Supply Output |
24VDC, 5.OA, 120W (max) |
| Operating Temperature |
4°C - 35°C (max) |
| Storage Temperature |
4°C - 35°C (max) |
UTILITIES & SERVICES
|
REQUIREMENTS
|
|
| Water Supply |
RO, Distilled or Deionised |
| Drain Type |
Sink/Tundish/Standard up-stand with suitable trap |
| Drain Flow |
>2L/min |
CONSUMABLES & ACCESSORIES
|
PART NUMBER
|
DESCRIPTION
|
TYPICAL ANNUAL REQUIREMENT
|
| TC003 |
UV Lamp |
1 |
| TC004 |
POU Filter (UF Model) |
1 |
| TC009 |
Endure™ Purification Pack 2 |
2 |
| TC010 |
Sanitisation Pack |
1 |
| TC011 |
POU Filter (Non-UF Model) |
1 |
| AV006 |
Wall Mounting Kit |
- |
| AV010 |
Remote Dispenser Assembly |
- |
TYPE 1 WATER
|
APPLICATIONS
|
| Molecular Biology, Immunology & Pharmacology |
| Electrochemistry |
| Critical Cell & Tissue Culture |
| (GF) AAS, HPLC, IC, ICPMS, GC, MS |
| DNA Sequencing |
| Genomics & Proteomics |
ALTO™ FLOW CHART
REMOTE DISPENSE STAND
|
|
WIDTH
|
HEIGHT
|
DEPTH
|
|
Remote dispense stand
|
250mm
|
640mm*
|
255mm
|
*To the top of Dispense Gun, height to the top of the Dispense tube curve is 670mm
SERVICES REQUIRED
3/4” BSP isolated cold water feed (washing machine tap/valve)
240 Volt, 13 Amp sockets
Drain/up-stand with trap or sink/tundish
OPTIONAL LEAK DETECTION
If
your water system is in a location where a leak could cause damage or
health and safety issues, we recommend that you protect against this
possibility by means of a leak detector, or for larger systems a
containment bund. Containment bunds, price available on application. The
following are available from Avidity Science:
|
PART NO.
|
DESCRIPTION
|
|
2084
|
Water Guard for small laboratory equipment up to 100L/hr
|
|
00029
|
Water Guard for larger equipment with a feed connection up to ¾” |