technology

right Electronic and Information Technology See all product

Total Trihalomethane Analyser (MS2000)

☆☆☆☆☆ ( 0 rates ) 55
Price : Call

Code: #28845

Supplier: WTE Co., Ltd

Total Trihalomethane Analyser (MS2000)

rightMORE INFORMATION

  • The MS2000 is a highly sensitive on-line total trihalomethane analyser which helps water treatment operators optimise their process to meet local regulations.
     
    It does not require reagents, which keeps the ongoing running costs to a minimum.
     
    The MS2000 utilises a contactless measurement technique based on Henry’s Law, sensing headspace gases or volatiles in the sampling tank provided, and provides a measurement system with very low maintenance requirements.
     
    Thanks to the clever design and technology the sensor never touches the water. This results in reduced drift, virtually no fouling, no sensor cleaning and very low maintenance.
     
    The MS2000 is accurate to low ppb concentrations and its wide dynamic range allows it to be used in a wide variety of environments.
     
    The concentration of total trihalomethanes (TTHMs) and water vapor in the headspace increases until equilibrium is reached with the concentration in the water. A sample of gas is then taken from the headspace and the response analysed to provide a concentration in ppb of contaminants in the water.
     
    APPLICATIONS
    • Analyse THMs post treatment
    • Monitor THMs in the distribution network
    • Monitor THMs post-chlorination for enhanced process control
    • Swimming pools and water parks
    • Monitoring THMs in Health, Defense and Industrial establishments 

  • Product Name

    MS2000

    Measuring Items

    Total trihalomethane (TTHMs)

    Manufacturer

    Multisensor Systems

    Detection Range

    5 ~ 1000 ppb

    Display Range

    0 ~ 200 ppb

    Repeatability

    -2 ~ +2%

    Accuracy

    -10 ~ +10%

    Measurement Frequency

    60 minutes (Measurement reporting time 2 minutes)

    Ambient Temperature

    0 ~ 40°C

    Water Temperature

    1 ~ 40°C

    Analogue Output

    4 ~ 20mA (Scalable to range required, max load 900Ω)

    Analogue Output Isolation

    400V DC

    Relay Voltage

    50V (Alarm and Fault Relays with NO and NC contacts)

    Relay Current

    5A

    Service Interface

    On-screen -or USB-A to PC (Using Multisensor Software provided for non touchscreen version)

    Data Storage

    μSD Card (Instrument lifetime data stored)

    Instrument Case

    IP65 (Coated Mild Steel)

    Instrument Weight

    16kg

    Sampling Chamber Material

    Stainless Steel

    Sampling System Weight

    12kg (Without water)

    Sampling System Dimensions

    570 x 490mm

    Sampling System Capacity

    3 litres

    Flow Limit Switch

    Contacts closed if flow below set point (Option available on request)

    Water Flow Rate

    0.5 ~ 1.0 L/min

    System Dimensions

    1170 x 490 x 300mm (Mounted on 2 separate PVC backboards)

    Supply Voltage

    90 ~ 240V AC (50Hz or 60Hz)

    Power Consumption

    Standard Version: 15W (Typical 10W durig operation)
    Touch Screen Version: 45W (Typical 45W during operation)

  • • NO REAGENTS: low running costs
    • The most cost effective solution
    • High sensitivity: ideal for potable water
    • No sensor contact with water
    • Low maintenance, no sensor cleaning
    • No reagents or gases, low running costs
    • Low maintenance, no sensor cleaning
    • Hourly sampling with instant results
    • Wide range of operating temperatures
    • Low cost of ownership

 
Scroll