MAIN ADVANTAGES:
• Special electronic and optical setting to facilitate the welding of particularly reflective metals such as silver and gold.
• LEICA’s stereo microscope with 10 levels of enlargement, tilted towards the operator, for a more ergonomic welding position.
• Integrated OROTIG’s patented OBC (On Board Camara) system to allow viewing-through of welding inside the chamber by means of on the large color 8.4" monitor and, by the touch of a finger, to alternate the reading of all working parameters and operator-machine messaging t on the color TFT display.
• The large "open space" welding chamber, with a lever-type design, is lowered towards the operator for a more comfortable and ergonomic working position.
• Innovative and powerful LED-type lighting system coaxial to the LASER-aperture and dimmable at operator’s needs
• Access and adjustment of all LASER functions through a rotary-switch inside the welding-chamber
• 20 pre-set working programs and 100 memory cells to store operator’s most used sets of working parameters.
• Electronic regulation of welding spot diameter.
• Only 0.15 mm in diameter of the minimum spot, thanks to the integrated OROTIG’s patented system "Spot Size Control System" (SSCS)
• Double water cooling circuit (heat-exchanger and speed-controlled fan exhausting the ehat inside) for a higher duty-cycle to support longer and heavy load working sessions.
• 5th generation newly devised (DCCPS -Digital Cap Charge Power Supply) generator, which manages gigitally all LASER-power requirements.
OBC - On Board Camera
Supplementary image viewing-thru system at welding, positioned coaxial to the stereo microscope and to the LASER aperture. It allows images originated at welding inside the chamber to be viewed on an integrated color monitor, connected to a HD video camera with a dedicated video output.
Digitally Cooling System
The REVOs cooling system has been designed to allow continuous working up to 24-hour/7-day cycles. Optical parts and electronic components are liquid-cooled by a digitally controlled Water/Water combined system, subsidized by a which allows total heat dissipation, maintaining the temperature inside the machine continuously below 40°C.
Large and Spacious Welding chamber
Spacious, free and comfortable. The special "tilt" structure of the REVOs welding chamber has been designed to facilitate welding and to allow the introduction of big objects, even large and bulky.The base of the welding chamber can be dropped, and once all open, it is possible to work on large objects.
Welding spot diameter Ø 0.1mm
Thanks to a particularly sophisticated system - the SSCS patented by OROTIG - it's possible to focus the LASER-beam on very small welding spots, as diminutive as Ø 0.15mm ( under certain limits of set working parameters).
Doors for Welding Chamber with Edging (Optional)
Thanks to this new closure system, through two metallic doors widely openable at 180°, it is possible to close/seal the welding chamber. Once locked, it will be possible to access to the welding chamber through two handrails, ergonomically positioned for a confortable working position .
All these new features translate into more available.