technology

right Mechanical See all product

DEED VB63F5 5-Axis Simultaneous CNC Vertical Machining Center

☆☆☆☆☆ ( 0 rates ) 21
Price : Call

Code: #27954

Supplier: Shandong Deed Precision Machine Tool., Ltd.

The overall structure has good rigidity. The Y-axis adopts a dual-drive design to ensure the balance of high-speed movement. The box-type spindle box structure brings higher stability of large torque output. The A/C axis is directly driven by a torque motor, eliminating the need for reduction...

rightMORE INFORMATION

  • Introduction
    DEED VB63F5 5-Axis Simultaneous CNC Vertical Machining Center is a high-efficiency, high-precision machining equipment. The workpiece can complete complex processing procedures in one clamping process, so this equipment can adapt to the processing of modern molds such as auto parts and aircraft structural parts. Pentaaxis means our device has five axes. The XYZ axis and the ac axis form linkage processing, so it is very good at space surface processing, special-shaped processing, hollow processing, punching, oblique hole, oblique cutting, etc., and its uses are very diverse.

    Features
    The overall structure of DEED VB63F5 5-Axis Simultaneous CNC Vertical Machining Center is rigid. The Y-axis adopts a dual-drive design, so it can maintain a good balance even in the case of high-speed movement.
    The box-type headstock structure can make the high torque output more stable.
    The A/C axis is directly driven by a torque motor without a reducer, so the running accuracy can be improved and the speed can be increased.
    The grating ruler can make the machine tool still have high machining accuracy and positioning accuracy in the case of high-speed movement.
    The in-line tool magazine directly driven by the servo motor runs fast and has precise positioning, which enables DEED VB63F5 5-Axis Simultaneous CNC Vertical Machining Center to meet various process requirements.

  • TRAVEL

       

    1.

    X-axis travel

    800mm

    2.

    Y-axis travel

    800mm

    3.

    Z-axis travel

    600mm

    4.

    A-axis travel

    ±135°

    5.

    C-axis travel

    continuously 360°

    SPINDLE

       

    1.

    Spindle Power

    34kw

    2.

    Spindle Torque

    72/91Nm

    3.

    Spindle taper

    HSK-A63

    4.

    Max speed

    18000rpm

    5.

    Drive type

    Motorized spindle

    TABLE

       

    1.

    Size

    Φ660mm

    2.

    Max.Swing diameter

    Φ900mm

    3.

    T-Slot (size * quantity * space)

    18×5×125 mm

    4.

    Max load

    800 Kg

    FEED

       

    1.

    X/Y/Z axis Rapid traverse

    60/60/40 m/min

    2.

    A/C axis speed

    60rpm/min

    PRECISION

       

    1.

    X/Y/Z axis positioning

    0.008mm

    2.

    X/Y/Z axis repeatibility

    0.004mm

    3.

    A/C axis repeatibility

    ±5''

    ATC

       

    1.

    Tool magazine type

    Chain and direct put-in type

    2.

    Tool magazine capacity

    ATC-40T

    3.

    Maximum tool size(full/unfull/length)

    Φ75/Φ120/ 270 mm

    4.

    Maximum tool weight

    6kg

    OTHERS

       

    1.

    Air Pressure

    0.65Mpa

    2.

    Power Capacity

    100KVA

    3.

    Machine Weight

    20000Kg

    4.

    Floor Space Dimension(L *W *H)

    6200×2500×3650mm

 
Scroll