Environment See all product

Boiler and Cooling Tower Photometer

☆☆☆☆☆ ( 0 rates ) 508

Price : 540 USD

Code: #15256

HI83305 is a compact, multiparameter photometer intended for boiling and cooling tower applications for use in the lab or in the field. The meter is one of the most advanced photometers available with an innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. This meter has 30 different programmed methods measuring 18 key water quality parameters and also offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves. Parameters specific to boiling and cooling towers include oxygen scavengers and silica which are important for maintaining equipment.

Add to card

MORE INFORMATION

The HI83305 benchtop photometer measures 18 different key water quality parameters using 30 different methods. This photometer features an innovative optical system that uses LEDs, narrow band interference filters, focusing lens and both a silicon photodetector for absorbance measurement and a reference detector to maintain a consistent light source ensures accurate and repeatable photometric readings every time.
Specially designed for use with boilers and cooling towers, the HI83305 is a comprehensive way to maintain precise water conditions in systems. Problems such as corrosion, deposition, and microbial growth can occur if these key parameters, such as oxygen scavengers and silica, aren’t maintained. Oxygen scavengers are added to remove residual dissolved oxygen in boiler feed water that can cause corrosion in a steam generating plant. It is important that levels of oxygen scavengers be routinely checked to prevent against corrosion and ensure that equipment is working efficiently. Boiler water maintenance is necessary to prevent or control deposit formation as seen with silica. Silica contamination can reduce system efficiency and increase maintenance of equipment due to scaling.
A digital pH electrode input allows the user to measure pH by a traditional glass electrode. The digital pH electrode has a built-in microchip within the probe that stores all of the calibration information. Having the calibration information stored in the probe allows for hot swapping of pH electrodes without having to recalibrate. All pH measurements are automatically compensated for temperature variations with a built-in thermistor located in the tip of the sensing bulb for fast and accurate temperature measurement.
The HI83305 offers an absorbance measuring mode that allows for CAL Check standards to be used to validate the performance of the system. The absorbance mode allows the user to select one of the five wavelengths of light (420 nm, 466 nm, 525 nm, 575 nm, and 610 nm) to measure and plot their own concentration versus absorbance mode. This is useful for users with their own chemical method and for educators to teach the concept of absorbance by using the Beer-Lambert Law.
Two USB ports are provided for transferring data to a flash drive or computer and to use as a power source for the meter. For added convenience and portability the meter can also operate on an internal 3.7 VDC Lithium-polymer rechargeable battery.

Parameter:

Parameter	Range	Resolution	Accuracy (at 25 °C)	Method	Wavelength	Reagent Code
Absorbance	0.000 to 4.000 Abs	0.001 Abs	+/-0.003Abs @ 1.000 Abs
Aluminum	0.00 to 1.00 mg/L (as Al³⁺)	0.01 mg/L	±0.04 mg/L ±4% of reading	Adaptation of the aluminon method.	525 nm	HI93712-01
Ammonia, Low Range	0.00 to 3.00 mg/L (as NH₃ -N)	0.01 mg/L	±0.04 mg/L ±4% of reading	Adaptation of the ASTM Manual of Water and Environmental Technology, D1426 Nessler method.	420 nm	HI93700-01
Ammonia, Medium Range	0.00 to10.00 mg/L (as NH₃ -N)	0.01 mg/L	±0.05 mg/L ±5% of reading	Adaptation of the ASTM Manual of Water and Environmental Technology, D1426, Nessler method	420 nm	HI93715-01
Ammonia, High Range	0.0 to 100.0 mg/L (as NH₃ -N)	0.1 mg/L	±0.5 mg/L ±5% of reading	Adaptation of the ASTM Manual of Water and Environmental Technology, D1426, Nessler method	420 nm	HI93733-01
Bromine	0.00 to 8.00 mg/L (as Br₂ )	0.01 mg/L	±0.08 mg/L ±3% of reading	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, DPD method	525 nm	HI93716-01
Chlorine Dioxide	0.00 to 2.00 mg/L (as ClO₂ )	0.01 mg/L	±0.10 mg/L ±5% of reading	Adaptation of the Chlorophenol Red method	575 nm	HI93738-01
Chlorine Dioxide, Rapid Method	0.00 to 2.00 mg/L (as ClO₂ )	0.01 mg/L	±0.10 mg/L ±5% of reading	Adapted from Standard Methods for the Examination of Water and Wastewater,18 ed., 4500 ClO₂ D.	525 nm	HI96779-01
Chlorine, Free	0.00 to 5.00 mg/L (as Cl₂ )	0.01 mg/L	±0.03 mg/L ±3% of reading	Adaptation of the EPA DPD method 330.5	525 nm	HI93701-01
Chlorine, Total	0.00 to 5.00 mg/L (as Cl₂ )	0.01 mg/L	±0.03 mg/L ±3% of reading	Adaptation of the EPA DPD method 330.5	525 nm	HI93711-01
Chromium (VI), Low Range	0 to 300 µg/L (as Cr(VI))	1 µg/L	±10 µg/L ±4% of reading	Adaptation of the ASTM Manual of Water and Environmental Technology, D1687 Diphenylcarbohydrazide method	525 nm	HI93749-01
Chromium (VI), High Range	0 to 1000 µg/L (as Cr(VI))	1 µg/L	±5 µg/L ±4% of reading at 25 °C	Adaptation of the ASTM Manual of Water and Environmental Technology, D1687, Diphenylcarbohydrazide method	525 nm	HI93723-01
Copper, Low Range	0.000 to 1.500 mg/L (as Cu)	0.001 mg/L	±0.010 mg/L ±5% of reading	Adaptation of the EPA method	575 nm	HI95747-01
Copper, High Range	0.00 to 5.00 mg/L (as Cu)	0.01 mg/L	±0.02 mg/L ±4% of reading	Adaptation of the EPA method	575 nm	HI93702-01
Hydrazine	0 to 400 µg/L (as N₂H₄)	1 µg/L	±4% of full scale reading	Adaptation of the ASTM Manual of Water and Environmental Technology, method D1385, p-Dimethylaminobenzaldehyde method	466 nm	HI93704-01
Iron, Low Range	0.000 to 1.600 mg/L (as Fe)	0.001 mg/L	±0.010 mg/L ±8% of reading	Adaptation of the TPTZ Method	575 nm	HI93746-01
Iron, High Range	0.00 to 5.00 mg/L (as Fe)	0.01 mg/L	±0.04 mg/L ±2% of reading	Adaptation of the EPA Phenanthroline method 315B, for natural and treated waters	525 nm	HI93721-01
Iron (II) - Ferrous	0.00 to 6.00 mg/L Fe²⁺ )	0.01 mg/L	& plusmn;0.10 mg/L ±2% of reading	Adaptation of Standard Methods for the Examination of Water and Wastewater, 3500-Fe B., Phenanthroline Method	525 nm	HI96776-01
Molybdenum	0.0 to 40.0 mg/L (as Mo⁶⁺)	0.1 mg/L	±0.3 mg/L ±5% of reading	Adaptation of the mercaptoacetic acid method	420 nm	HI93730-01
Nitrate	0.0 to 30.0 mg/L (as NO₃ - N)	0.1 mg/L	±0.5 mg/L ±10% of reading	Adaptation of the cadmium reduction method	525 nm	HI93728-01
Nitrite, Low Range	0 to 600 µg/L (as NO₂-N)	1 µg/L	±20 µg/L ±4% of reading	Adaptation of the EPA Diazotization method 354.1	466 nm	HI93707-01
Nitrite, High Range	0 to 150 mg/L (as NO₂^-)	1 mg/L	±4 mg/L ±4% of reading	Adaptation of the Ferrous Sulfate method	575 nm	HI93708-01
Oxygen, Dissolved	0.0 to 10.0 mg/L (as O₂)	0.1 mg/L	±0.4 mg/L ±3% of reading	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Azide modified Winkler method	420 nm	HI93732-01
Oxygen Scavengers (Carbohydrazide)	0.00 to 1.50 mg/L (as Carbohydrazide)	0.01 mg/L	±0.02 mg/L ±3% of reading	Adaptation of the iron reduction method	575 nm	HI96773-01
Oxygen Scavengers (Diethylhydroxylamine)(DEHA)	0 to 1000 µg/L (as DEHA)	1 µg/L	±5 µg/L ±5% of reading	Adaptation of the iron reduction method	575 nm	HI96773-01
Oxygen Scavengers (Hydroquinone)	0.00 to 2.50 mg/L (as Hydroquinone)	0.01 mg/L	±0.04 mg/L ±3% of reading	Adaptation of the iron reduction method	575 nm	HI96773-01
Oxygen Scavengers (Iso-ascorbic Acid)	0.00 to 4.50 mg/L (as Iso-ascorbic acid)	0.01 mg/L	±0.03 mg/L ±3 % of reading	Adaptation of the iron reduction method	575 nm	HI96773-01
pH	6.5 to 8.5 pH	0.1 pH	±0.1 pH	Adaptation of the Phenol Red method	525 nm	HI93710-01
Phosphate, Low Range	0.00 to 2.50 mg/L (as PO₄ ^3-)	0.01 mg/L	±0.04 mg/L ±4% of reading	Adaptation of the Ascorbic Acid method	610 nm	HI93713-01
Phosphate, High Range	0.0 to 30.0 mg/L (as PO₄ ^3-)	0.1 mg/L	±1.0 mg/L ±4% of reading	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Amino Acid method	525 nm	HI93717-01
Silica, Low Range	0.00 to 2.00 mg/L (as SiO₂ )	0.01 mg/L	±0.03 mg/L ±3% of reading	Adaptation of the ASTM Manual of Water and Environmental Technology, D859, Heteropoly Molybdenum Blue method	610 nm	HI93705-01
Silica, High Range	0 to 200 mg/L (as SiO₂)	1 mg/L	±1 mg/L ±5% of reading	Adaptation of the USEPA Method 370.1 for drinking, surface and saline waters, domestic and industrial wastes and Standard Method 4500-SiO₂	466 nm	HI96770-01
Zinc	0.00 to 3.00 mg/L (as Zn)	0.01 mg/L	±0.03 mg/L ±3% of reading	Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Zincon method	575 nm	HI93731-01

** Reagents for 50 tests.† Unless noted otherwise, all reagent codes ending with -01 are for 100 tests.

General Meter

Wavelength Accuracy	±1 nm
Light Source	5 LEDs with 420 nm, 466 nm, 525 nm, 575 nm, and 610 nm narrow band interference filters
Spectral bandwidth	8 nm
Input Channels	1 pH electrode input and 5 photometer wavelengths
pH Electrode	digital pH electrode (not included)
Logging Type	log on demand with user name and sample ID optional input
Logging Memory	1000 readings
Connectivity	USB-A host for flash drive; micro-USB-B for power and computer connectivity
GLP	calibration data for connected pH electrode
Display	128 x 64 pixel LCD with backlight
Battery Type / Life	3.7 VDC Li-polymer rechargeable battery / >500 photometric measurements or 50 hours of continuous pH measurement
Power Supply	5 VDC USB 2.0 power adapter with USB-A to micro-USB-B cable (included)
Environment	0 to 50.0 ^oC (32 to 122.0 ^oF); 0 to 95% RH, non-condensing
Dimensions	206 x 177 x 97 mm (8.1 x 7.0 x 3.8")
Weight	1.0 kg (2.2 lbs.)
Photometer/Colorimeter Light Detector	silicon photodetector
Cuvette Type	round, 24.6 mm
Number of Methods	128 max.
Ordering Information	HI83305 is supplied with sample cuvettes and caps (4 ea.), cloth for wiping cuvettes, USB to micro USB cable connector, power adapter and instruction manual.

High Efficiency LED Light Source
A LED light source offers superior performance as compared to a tungsten lamp. LEDs have a much higher luminous efficiency, providing more light while using less power. They also produce very little heat, which could otherwise affect the optical components a electronic stability. LEDs are available in a wide array of wavelengths, whereas tungsten lamps are supposed to be white light (all wavelengths of visible light) but actually have a poor blue/violet light output.
High-Quality Narrow Band Interference Filters
The narrow band interference filter not only ensure greater wavelength accuracy (+/- 1 nm) but are extremely efficient. The filters used allow up to 95% of the light from the LED to be transmitted as compared to other filters that are only 75% efficient. The higher efficiency allows for a brighter, stronger light source. The end result is higher measurement stability and less wavelength error.
Reference Detector for a Stable Light Source
A beam splitter is used as part of the internal reference system of the HI83305 photometer. The reference detector compensates for any drift due to power fluctuations or ambient temperature changes. Now you can rely on a stable source of light between your blank (zero) measurement and sample measurement.
Large Cuvette Size
The sample cell of the HI83305 fits a round, glass cuvette with a 25 mm path length. Along with the advanced optical components, the larger size of the cuvette greatly reduces errors in rotation from the indexing mark of the cuvettes. The relatively long path length of the sample cuvette allows the light to pass through more of the sample solution, ensuring accurate measurements even in low absorbance samples.
Focusing Lens for Greater Light Yield
Adding a focusing lens to the optical path allows for the collection of all of the light that exits the cuvette and focusing the light on the silicon photo detector. This novel approach to photometric measurements cancels the errors from imperfections and scratches present in the glass cuvette eliminating the need to index the cuvette.

technology

Boiler and Cooling Tower Photometer

MORE INFORMATION

RELATED PRODUCTS