technology

Alcohol Meter ALM-155

☆☆☆☆☆ ( 0 rates ) 87
Price : Call

Code: #29728

Supplier: Kyoto Electronics Manufacturing Co., Ltd.

Small size & high-performance bench top density meter with oscillating capillary tube for the analysis of oenology, sprits and beer.

rightMORE INFORMATION

  • Applications
    Wineries…
    Alcohol is the main legal parameter for bottled wines; the declaration of fake values entails severe penalties for wine producers. For this reason, the analysis of wine must be done in accordance with the official analysis method. 
    It is very important to check density, specific gravity and alcohol content during wine fermentation, in order to verify its progress and provide notice if it stops prematurely.
     
    Must production…
    The density of grape juice indicates the amount of sugar contained in the juice before fermentation. It can determine the expected alcohol content in wines, so it is very important to analyze its density accurately.
     
    Oenological labs…
    In addition to providing analytical support to wineries, these laboratories can release certificates of analysis with legal validity. As well as wineries, these laboratories have to perform analyses in accordance with the official method in order to be sure of the accuracy of the values they certify.
     
    Distilleries and spirits…
    Companies producing spirits, such as distilleries, have products with a high alcohol content. The ALM-155 is a high performance instrument working in the whole concentration range from 0.00% to 100% alcohol content. Therefore, the instrument is highly suitable for this application.
     
    Beer production…
    Monitoring density and specific gravity during the beer production process is very important for the quality of the final product. ALM-155 can provide alcohol testing after the beer sample has been distilled.
     
    Vinegar making...
    Vinegar is obtained by oxidation of the ethanol content of wine, cider, beer, other fermented alcoholic beverages, or raw materials such as malt, rice and raw and cooked fruit. Checking the alcohol content during the oxidation process is very important to understand when ethanol has completely turned into acetic acid.

  • Type

    Alcohol Meter

    Model

    ALM-155

    Measurement Range

    Alcohol content : 0.00100.00 vol%
    Density : 0.69937
    1.24887g/cm3
    Specific Gravity
    20/20 : 0.700001.25000
    Brix : 0.0
    50.0
    Babo : 0.0
    45.0
    Baume : 0.0
    25.0

    Repeatability

    Alcohol content : (SD)0.05 vol%
    Density : (SD)0.00005 g/cm3
    Specific Gravity : (SD)0.00005
    Brix : (SD)0.002
    Babo : (SD)0.002
    Baume : (SD)0.001

    Resolution

    Alcohol content : 0.01 vol%
    Density : 0.00001 g/cm3
    Specific Gravity : 0.00001
    Brix : 0.02
    Babo : 0.02
    Baume : 0.01
    Temperature : 0.01

    Measurement Temperature

    20°C / 60°F

    Alcohol Table

    OIMLvol%/wt%/ HMCEAt 20 / G225At 20 / AOAC / NIST(At 60°F)

    Calibration

    Calibration
    One point with pure water or two points with dry air and pure water (Note: dry air pump should be prepared locally for two points calibration)

    Min. Sample Required Automatic sucking in

    ca. 8mL (for 10 seconds ofsampling time)

    Measurement Time In auto operation

    2 to 4 min. (with the peristaltic pump)

    Display

    Display Instrument :
    LCD (with a backlight)

    Displayed contents :
    Density : (5-2 mode)x.xxxxx : (4-1 mode)x.xxxx
    Specific Gravity : (5-2 mode)x.xxxxx : (4-1 mode)x.xxxx
    Alcohol content : (5-2 mode)x.xx : (4-1 mode)x.x
    Temperature : (5-2 mode)xx.xx : (4-1 mode)xx.xx

    Sampling

    1) Auto Sampling by Peristaltic Pump
    2) Manual by optional syringe

    Auto Start function

    Number of repeat time: 2-100

    Number of Measurement Result

    100

    Density-Concentration Conversion

    Alcohol content
    Fixed
    Stored as Standard

    Viscosity Correction

    None

    PC Software

    SOFT-CAP (Data Acquisition Software)

    Auto Cleaning Unit

    Not Connectable

    Multiple Sample Changer

    Not Connectable

    Interfaces

    RS-232C : Dot Matrix Printer (COM1) , PC (COM2)
    USB : USB flash drive , keyboard

    Data I/O

    CSV data saving to USB

    Ambient Conditions

    1) Temperature 5 to 35ºCM
    2) Humidity
    Below 85%RHno condensation

    Power Supply

    100 to 240 VAC±10%, 50/60Hz

    Power Consumption

    Approx. 30W

    Dimension

    270 mm (W)×402 mm (D)×163 mm (H)

    Weight

    Approx. 10 kg

    onformity standard

    CE marking EMC: EN61326-1 LVD: EN61010-1
    RoHS2 Directive

  • One button measurement with small sample volume
    The ALM-155 is equipped with peristaltic pump for automatic sampling. The required sample volume is only 8mL and can be used for repeatability testing with the automatic repeating function. The analysis of alcohol content (on the distilled wine sample) or density (on wine as it is) is performed in two to four minutes for one measurement by pressing just one button. When high viscous sample is measured, an optional syringe can be utilized to introduce the sample into the measurement cell what makes the ALM-155 suitable for the analysis of any alcohol products.
     
    Simple calibration with pure water and easy maintenance
    The calibration of ALM-155 does not require expensive standards, only pure water. After analysis, the unit can be cleaned by simply washing the cell with pure water or a kitchen detergent. The only replacement parts are the sampling tubes and those can be replaced by the user. The daily performance check can be easily performed by the operators and requires pure water only.
     
    Automatic Saving results with digital data
    The results are not necessary to be recorded by hand-writing. An optional printer can automatically print out the results once the measurement is completed. The ALM-155 can also store measurement up to 100. The data can be transferred to a connected USB memory stick or to an optional PC software through an RS-232C cable.

 
Scroll