- Temperature Range: 300 ~ 1700°C (572 ~ 3092°F)
- Temperature Uncertainty: ±0.25% of reading ±1°C
- Temperature Resolution: 0.1°C
- Stability: ±1°C per 8-hour period
- Source Non-Uniformity: ±1°C within center 1/3 of ID
- Heated Cavity Shape: Closed end tube 41 mm ID x 255 mm long with ≈ 125 mm heated length (field replaceable)
- Exit Port Diameter: 25 mm (1”)
- Emissivity ε: 1.0 @ 0.65 ~ 1.8 μm (lower at longer wavelengths - a correction table is supplied in the manual)
- Standard Calibration Method: Radiometric (pyrometric)
- Temperature Sensor: Type B thermocouple
- Warm-up Time:
45 ~ 50 min. from ambient ~ 300°C
65 ~ 80 min. from 300 ~ 1600°C
- Slew Rate to 1°C Stability: ≈20°C per minute
- Slew Rate to 0.1°C Stability:
≈ 30 min for T < 500°C
≈ 20 min T > 500°C
- Operating Ambient Temp: 0 ~ 44°C (32 ~ 110°F)
- Cooling: Fan cooled, air inlet on top panel
- Operating Humidity: 90% RH max, non-condensing
- Dimension (H x W x D): 648 x 500 x 551 mm (25.52 x 19.7 x 21.7 in)
- Weight: 80 kg (175 lb)
- CE Certified: Yes
Communication and Electrical Specifications
- Remote Set Point: Via serial port
- Method of Control: Digital PID controller
- Power Requirements: 230 VAC, 50 Hz (Manufactured in Germany)
Optional Accessories
Cold aperture wheel assembly, 6 apertures 25.4 to 2.54 mm
Cold aperture wheel assembly, 6 apertures 50 to 1.56 mm,
Serial Communication Output RS485 (built-in ex works)
IGA 12-TSP, 1570 nm, 250" 1400°C, through lens sighting, laser targeting, focusable Optics 2
IS 12-TSP, 940 nm, 530 to 1900°C, through lens sighting, laser targeting, focusable Optics 2