technology

HOME // TECHNOLOGY // Chemistry

right Chemistry See all product

Universal Cutting Mill PULVERISETTE 19

☆☆☆☆☆ ( 0 rates ) 145
Price : Call

Code: #29848

Supplier: LMS Technologies Pte Ltd

Universal Cutting Mill PULVERISETTE 19

Add to card

rightMORE INFORMATION

  • FRTISCH offers two models of Universal Cutting Mill PULVERISETTE 19 with different variable rotor speed range to better suit to different size reduction task.
     
    PULVERISETTE 19 - Variable speed 50–700 rpm for powerful comminution
    Due to the variable rotational speed adjustment in increments of ten between 50 and 700 rpm and a torque of up to 67 Nm enables due to the combination of low cutting rate and extreme cutting forces a very powerful comminution. The low-speed PULVERISETTE 19 comminute hard, tough-elastic samples with a maximum feed size of 70 x 80 mm and a throughput of 60 l/h.
     
    PULVERISETTE 19 - Variable speed 300-3000 rpm for fine comminution
    Due to the variable rotational speed adjustment in increments of hundred between 300 and 3000 rpm you can fine tune the comminution process for each sample within a very wide range of applications. The high-speed Universal Cutting Mill PULVERISETTE 19 with a torque of up to 30 Nm comminutes dry, soft to medium-hard sample materials and fibrous materials and plastics with reliable reproducible results with a maximum feed size of 70 x 80 mm and a throughput of up to 60 l/h.
     
    At the same time, it is the ideal solution for all cases where e.g. thermal damage, the loss of highly volatile substances, or an excessively high fine share need to be avoided.
     
    One special advantage of FRITSCH PULVERISETTE 19: Straw, films and similar materials can be fed in up to their full length without additional preparation. And the PULVERISETTE 19 is also ideal for RoHS tests.
     
    Application:
    - PLASTICS AND TEXTILES
    - AGRICULTURE AND FORESTRY
    - ENVIRONMENT
    - ROHS
    - ANALYTIC
    - CONSTRUCTION MATERIALS
    - CHEMISTRY
    - FOOD STUFFS 

  • Working principle

    cutting

    Variable rotor speed

    Two models available:

    · 50 - 700 rpm

    · 300 – 3000 rpm

    Optimal for material type

    hard, tough-elastic, temperature-sensitive samples (50 – 700 rpm)

    medium-hard, soft, brittle, tough, fibrous (300 – 3000 rpm)

    Cutting tools

    rotor with V-cutting edges and fixed knives, rotor with notched edges, rotor with straight cutting edges and fixed knives, disk milling cutter rotor with indexable inserts and fixed knives

    Materials of the cutting tools

    hardened stainless steel, hardmetal tungsten carbide, chromium-free tool steel, stainless steel 316L, chromium-free steel DC01

    Max. feed size (depending on the material and funnel)

    70 x 80 mm

    Max. throughput (depending on the material and sieve size)

    60 l/h

    Final fineness (depends on sieve cassette also available in further perforations)

    0.2 - 10 mm

    Feeding

    batchwise/continuous

    Drive

    Up to 2.8 kW three-phase motor with frequency converter and flywheel mass for stabilising the drive torque (50 - 700 rpm)

    Up to 5 kW three-phase motor with frequency converter and flywheel mass for stabilising the drive torque (300 - 3000 rpm)

    Electrical Details

    380-460 V/3~, 50-60 Hz, 2800 watt, 67 Nm (50 - 700 rpm)

    380-460 V/3~, 50-60 Hz, 5000 watt, 30 Nm (300 - 3000 rpm)

    Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, rotor and sieve cassette used)

    LpAd = 75 dB (50 - 700 rpm)

    LpAd = 78 dB (300 - 3000 rpm)

    Weight

    83 kg (50 - 700 rpm)

    79kg (300 - 3000 rpm)

    Dimensions (W x D x H)

    table mounted or on support frame 44 x 79 x 56 cm

  • - Powerful variable rotational speed (Two models available: 50–700 rpm or 300 – 3000 rpm)
    - Max. feed size 70 x 80 mm
    - Throughput of up to 60 l/h
    - Defined final fineness due to interchangeable sieve cassettes 0.2 – 10 mm, (further sieve sizes available)
    - Collection vessel 0.25 litres to 60 litres
    - Optimised Clean Design for maximum ease of cleaning
    - Practical operation directly on the front panel
    - Maintenance–free 2.8 kW three-phase motor (for 50 – 700 rpm) and maintenance–free 5kW three-phase motor (for 300 – 3000 rpm) with frequency converter.
    - Single-phase versions with maintenance-free three phase frequency converter
    - Externally adjustable cutting gap
    - Double cone bearing of the rotor for long service life
    - Standard funnel for long solids or protected funnel with sample pusher
    - Different rotors for multi-functional use
    - Wear-free labyrinth seals made of stainless steel on both sides of the rotor – on the shaft and in the lid
    - Rotor knives and fixed knives are exchangeable for long-lasting quality
    - Optimum airflow for fast comminution and anti-clogging
    - Sample exhaustion with FRITSCH cyclones

 

rightRELATED PRODUCTS

Scroll