technology

HOME // TECHNOLOGY // Chemistry

right Chemistry See all product

SPM – Sequential microdispenser

☆☆☆☆☆ ( 0 rates ) 512
Price : Call

Code: #19417

Supplier: Advanced Microfluidics SA

The all-in-ONE sample manipulator

Handle delicate samples with great precision

Add to card

rightMORE INFORMATION

  • Our OEM sequential microdispenser is a high-precision dosing device for automated microfluidic applications. The high-accuracy dosing and nearly-pulseless flow stream capabilities make it the perfect tool for multiple liquid handling in the range of milliliter down to nanoliter.

     

    The integrated zero dead volume selection valve allows you to handle multiple fluids with one syringe pump thanks to the high cleaning efficiency and low carryover. Coupled with its ease of use, this syringe pump is thus the ideal companion for your instruments and laboratory experiments at a reduced investment cost.

     
     

    APPLICATIONS

    • Sample preparation automation
    • Industry
    • Lab-on-chip
    • Research & Education
    • Biological sample handling
    • Accurate flow streams of fluids
    • High-precision sampling and dosing

    FUNCTIONS

    • Dilute samples or reagents
    • Aspirate liquids
    • Dispense liquids
    • Control the flow rate
    • Prepare complex mixes
    • Alternate air / liquid samples

  • Valves specifications

    Reference Configuration Wetted materials Internal vol. Carryover vol. Channel ø Max. pressure
    V-D-2-6-050-C-P 6-ports ultra-low carryover volume PCTFE,PTFE 5.2 μL 1.5 μL 0.5 mm 7 bars
    V-D-1-6-050-C-P 6-ports low carryover volume PCTFE,PTFE 3.5 μL 2.6 μL 0.5 mm 7 bars
    V-D-1-8-050-C-P 8-ports low carryover volume PCTFE,PTFE 3.5 μL 2.6 μL 0.5 mm 7 bars
    V-D-1-8-100-C-U 8-ports low carryover volume PCTFE,UHMW-PE 18.1 μL 11 μL 1 mm 7 bars
    V-D-1-10-050-C-U 10-ports low carryover volume PCTFE,UHMW-PE 4.5 μL 2.8 μL 0.5 mm 7 bars
    V-D-1-10-100-C-U 10-ports low carryover volume PCTFE,UHMW-PE 18.1 μL 11 μL 1 mm 7 bars
    V-D-1-12-050-C-U12-ports low carryover volumePCTFE,UHMW-PE4.5 μL2.8 μL0.5 mm7 bars

    Other configurations are available upon request.

    Valve heads are interchangeable.

     
     Syringes specifications
    Reference Volume Plunger materials Min. flow rate Max. flow rate Min dosing volume
    S-25-P 25 μL PTFE 0.25 μL/min 750 μL/min 0.05 μL
    S-50-P 50 μL PTFE 0.5 μL/min 1'500 μL/min 0.1 μL
    S-100-P or S-100-U 100 μL PTFE or UHMW-PE 1 μL/min 3'000 μL/min 0.2 μL
    S-250-P or S-250-U 250 μL PTFE or UHMW-PE 2.5 μL/min 8'000 μL/min 0.5 μL
    S-500-P or S-500-U 500 μL PTFE or UHMW-PE 5 μL/min 15'000 μL/min 1 μL
    S-1000-P or S-1000-U1000 μLPTFE or UHMW-PE10 μL/min30'000 μL/min2 μL
     

    The wetted materials being PTFE, PCTFE and borosilicate glass, the pump offers an exceptional compatibility to most chemicals and biological samples.

    It is possible to add a heating/cooling module around the syringe to suit your specific application.

     
     Pump specifications
    Operating temperature 5-40°C (41-104°F)
    Operating humidity 20-80%, non-condensing
    Max. pressure 7 bars (102 psi)
    Wetted materials PTFE or UHMW-PE, PCTFE and borosilicate glass
    Dead volume None
    Carryover volume Down to 1.5 μL (configuration dependent)
    Plunger travel 30 mm with 96'000 micro-steps for nearly pulseless flow
    Plunger resolution Selectable 3'000 steps (standard) / 24'000 steps (high)
    Plunger drive Screw drive with linear encoder for step loss detection
    Valves configuration Zero dead-volume multi-port distribution with angular encoder
    Tube port fittings Standard 1/4-28 UNF, flat-bottom
    Cross-contamination Typically from 1/100 to 1/1000 per cleaning cycle
    Accuracy < 1% deviation from expected value at full stroke
    Electrical nterface USB mini, 9-pin D-Sub (other upon request)
    Communication type Serial, I2C (other upon request)
    Power 18-24 VDC, 2.2 A peak, 40 W (18 VDC optimised for battery use)
    Time for full stroke 2 - 3'000 seconds
    Dimensions 199.7 x 126.3 x 50.5 mm
    Weight1.5 kg
     

    • Optimised to limit contamination
    • Swiss quality
    • Simple air removal
    • Easy to use and integrate
    • Allows for multiple liquids
    • Excellent biochemical compatibility

 

rightRELATED PRODUCTS

Scroll