Greater output size allows a larger 3D model to be printed at once
With the new Build Size lineup, the Cubicon Style NEO-A31C has expanded the bed size as well as has increased output volume by approximately 324% compared to Style Plus-A15CR. Depending on your purpose, you can print more various sizes of 3D models.
Real-time monitoring and remote control with a built-in camera
With the built-in camera inside the Cubicon Style NEO, you can check the output process not only on the touchscreen at the front but also on your computer or smartphone. Also, if an output error or failure is identified, the output situation can be controlled through network remote control. (power stop and restart, etc.)
Auto-Leveling Plus creates high-quality output
The flatness of the bed on which the build is printed and the spacing between nozzles are important factors in determining the quality of the output.
Style NEO delivers Auto-Leveling with the error precision within 10μm by applying the industrial load cell, it reduces height error failures during printing and provides the user with the best-in-class output quality.
An easy detachment of output with the specially coated heating bed with insulation
The heating bed of CUBICON Style NEO is specially coated to allow the output to start immediately without separate adhesive or masking tape, as well as to be easily separated after the output, providing the best output quality.
It's guaranteed. Besides, thermal efficiency was improved by applying insulation to the bottom of the heating bed.
Enhanced usability with stainless nozzle kit
Equipped with the stainless nozzle kit patented by Cubicon has enhanced usability and minimized the probability of failure. Different from a typical nozzle kit with a tube attached, it is connected with a stainless steel pipe to provide excellent performance even in hot output materials.
* To maintain quality and minimize maintenance, it is recommended that filaments from other companies are separated from the extruder and used.
The automatic filament feeder with built-in two rollers
The automatic filament feeder with built-in two rollers allows a more stable filament supply to significantly improve ease of use. In addition, with the contactless optical sensor, it automatically stops the output when there is a supply problem due to filament exhaustion or breakage and reduces output time and saves material waste dramatically by allowing the output to continue when reconnected.
* To maintain quality and minimize maintenance, it is recommended that filaments from other companies are separated from the extruder and used.