technology

right Electronic and Information Technology See all product

Hot Set Tester EB 16-II

☆☆☆☆☆ ( 0 rates ) 12
Price : Call

Code: #29834

Supplier: LMS Technologies Pte Ltd

Hot Set Tester EB 16-II

rightMORE INFORMATION

  • The ELASTOCON EB 16-II Hot Set Tester is used for performing hot set testing of cable material according to IEC 60811-2-1 and other equivalent standards. The Tester is built on an ageing oven which performs inside the apparatus requirements in IEC 811.
     
    The samples are introduced through a specially designed small opening in the top of the oven in order to avoid too much heat loss when inserting and cutting the samples.
     
    The oven has a controlled air exchange rate and low air speed which can be controlled by a flow meter, meeting the requirements for ageing ovens in IEC 811.
     
    Measurements are made through the window with a laser pointer mounted on a measuring scale placed on the door. With a push on a button on the scale, the elongation is measured and the values automatically are entered into a spreadsheet template through a Bluetooth connection.
     
    The templates are for testing 3 flat samples, 3 round samples, 4 flat samples with possibility to have 2 different materials, and 4 round samples with possibility to have 2 different materials.
     
    The set is measured outside the oven with a digital calliper which is also connected to the computer. A finished report can be produced by using a standard spreadsheet software.

  • Standards
    - The oven performs well inside the apparatus requirements in IEC 60811-2-1 and other equivalent standards.
    Temperature range
    - +40 °C to +250 °C
    Useful volume
    - 60 litres
    Important specifications
    - The sample holder moves up and down by a servo motor
    - Special design with controlled air exchange rate and low air speed (<0,001 m/s), which is dependent on the air exchange rate only
    - Temperature variation in time ± 0,25 °C
    - Temperature variation in space ± 0,5 %
    - Temperature controller with 0,1 °C setpoint
    - Temperature indicator with sensor in the test space
    - Solid state relay for safe control
    - Adjustable over and under temperature limits with alarm
    - Fixed over temperature fuse at 340 °C
    - Over temperature safety relay
    - Flowmeter with needle valve, for setting the air exchange rate
    - The temperature, timers, alarms and movement are controlled by a micro PLC with colour touch screen
    - Laser pointer for measuring the elongation
    - Calliper for measuring the tension set
    - Temperature controlled cooling fan for the electronics cabinet
    - Run-time meter
    Included accessories
    - Clamps and weights for 8 samples are included as well as the computer (Windows)
    - Stylus pen for the instrument touch screen
    - Accredited calibration including certificate
    - Manual in English
    - Spreadsheet templates for testing and result report for
    + 1 material, 3 samples
    + 1 material, 3 samples – round material
    + 2 materials, 2 samples per material
    + 2 materials, 2 samples per material – round material

 
Scroll