technology

HOME // TECHNOLOGY // Electronic and Information Technology

right Electronic and Information Technology See all product

SWITCH-TEMP - TT-30/160

☆☆☆☆☆ ( 0 rates ) 321
Price : Call

Code: #17959

Supplier: TOOL-TEMP ASIA PTE LTD

SWITCH-TEMP - TT-30/160
Pressurised water unit with 2 temperature circuits for cyclic heating and cooling
Operational use: with water from 30°C up to 160°C
The unit enables to switch within seconds between two independent circuits.
 

Add to card

rightMORE INFORMATION

  • Self-optimizing temperature controller with digital display of the set and actual temperature. With high precision regulation in 1/io° range; can be adjusted to read °C or °F.
    Automatic temperature control - difference between set and actual temperature activates an alarm.
    Indication of the pressure to the mould and of the system pressure.
    Automatic mould drain, pressure discharge, aeration and water filling.
    Lime scale free heat exchanger.
    All components in contact with water are made of stainless steel or bronze.
    Safety devices:
    - Automatic level control for dry run protection.
    - Electronic temperature limiter in the controller and separate mechanical safety thermostat.
    - Main switch, transformer and motor protection switch.
    - Horn in case of failure.
    All failures are visually indicated.
    Unit on castors.

  • TECHNICAL DATA:

    cold water circuit 1

    hot water circuit 2

    Temperature range
    Water


    30°C up to 90°C


    100°C up to 160°C

    Temperature control

    2 self-optimizing, electronic microprocessor controllers MP-888 with digital display of the set and actual value.
    Automatic temperature monitoring.

    Flow control

    electronically, with digital display and automatic control of the minimum flow.

    Heating capacity

    6 kW

    12 kW

    Cooling capacity

    approx. 200 kW at 90°C

    approx. 80 kW at 160°C

    Pump capacity
    Pressure mode

    motor 1,8 kW
    max. 6,5 bar / max. 75 l/min.

    motor 1,8 kW
    max. 6,5 bar / max. 75 l/min.

    Pressure increasing pump

    yes

    yes

    Temperature measurement at the mould

    no

    no

    Pressure discharge and mould drain

    yes

    yes

    Leakstopper

    no

    no

    Filling

    automatic

    automatic

    Connections
    Medium
    Cooling water
    Compressed-air


    3/4” BSP female thread
    1” BSP male thread
    1/4” BSP female thread

    Dimensions

    1'300 × 480 × 1'400 mm, incl. castors

    Weight

    approx. 245 kg empty

    Colour

    silvergrey RAL 7001
     
    The heat-up and cool-down times are depending on the mould weight.
    The unit TT-30/160 is designed for a mould weight up to 500 kg.
    The fastest cycle time can be achieved with small moulds.
    Sufficiently large form channels are also important.
    Faster times can be achieved if each mould half is equiped with a separate unit.

  • All components in contact with water are made of stainless steel or bronze.

 

rightRELATED PRODUCTS

Scroll