Microprocessor Temperature Controller - MP-888

☆☆☆☆☆ ( 0 rates ) 354
Price : Call

Code: #17958

Supplier: TOOL-TEMP ASIA PTE LTD

Microprocessor Temperature Controller - MP-888
Once the, US-programs“ are set, the corresponding parameters are adjusted automatically on US-Gallons per minute and degree Fahrenheit.

rightMORE INFORMATION

  • Self-optimizing feature allows a very high regulating accuracy even at
    high temperatures.
    Adheres to the set temperature independently of the consumer
    Can be adjusted to indicated °C or °F.
    The analogue interfaces 0 - 5 V, 0 - 10 V and 4 - 20mA are standard
    included in the controller.
     

  • TERM

    FUNCTION

    Set Value Indication

    Set temperature, required temperature

    Actual Value Indication

    Actual temperature, measured, effective temperature

    Flow Rate Indication

    Display in litres/min (British) or gallons/min (American)

    Temperature Adjustment

    Raise / Reduce of set value

    Programming

    Press 3 seconds (Program Steps 1 - 67)

    Flow Control


    Monitoring (LED Green)

    Flow control active

    Alarm (LED Red)

    Alarm flow control

    Cooling ON

    Lights up when the cooling relay is activated

    Heating ON

    Lights up when the heating relay is activated

    Sensor Failure

    Lights up when the sensor is not connected correctly or the wrong type of sensor is used

    Temperature Deviation Control

    Lights up when the difference between set and actual temperature is too high. Factory set ± 5°C (± 9°C)

    Maximum Temperature

    Lights up, when the maximum temperature has been reached. (Model Dependant)

    External Temperature Control

    Lights up when the set point is adjusted from external by putting on current / voltage.

     

  • Self-optimizing feature allows a very high regulating accuracy even at
    high temperatures.
    Adheres to the set temperature independently of the consumer
    Can be adjusted to indicated °C or °F. 
     

 
Scroll