right Electronic and Information Technology See all product

Frequency inverter type FXDM32A

☆☆☆☆☆ ( 0 rates ) 76
Price : Call

Code: #23126

Supplier: Ziehl Abegg AG

Frequency inverters are ideal for use in the energy efficient control of all types of motors. ZIEHL-ABEGG supplies frequency inverters that are perfectly matched to our customers' applications. The main focus is on ventilation applications, with a special emphasis on ease of handling and operation.


  • - The Icontrol frequency inverters are intended primarily for requirement-based and energy-saving speed control of internal rotor motors (IEC standard motors).
    All ZIEHL-ABEGG sensors can be combined with the universal frequency inverters. The actual value measured at the sensor is compared with the setpoint. This results in control of the connected fan.
    - Control to volumetric air flow or differential pressure is possible for example especially for use in air-conditioning technology. Simple start-up is possible with the selectable operating modes in the device.
    - Processes in other application areas can also be controlled. The frequency inverters can be used flexibly.
    - Frequency inverters of the 2nd edition enable modern operation by capacitive keys. This means that no mechanical key is pressed but operation takes place capacitively by touching the key surface.
    - In addition, there is a directly selectable On/Off key and two keys the function of which depends on where you currently are in the menu (softkeys). A commissioning wizard and help texts are available for commissioning. There is a 2nd control circuit in the device and the possibility of retrofitting a clock module as a timer.

  • Multifunction display with clear text display:
    Different menu languages are selectable
    Simple commissioning by operating modes:
    Typical operating modes e.g. for air-conditioning, refrigeration or ventilation technology can be selected.
    Activation of a 2nd control circuit in the selected operating mode:
    By assignment of the sensor function input 2 (E2) for the 2nd control circuit.
    Simple programmability:
    Typical settings can be made: e.g. setting of a minimum speed, limitation of the maximum speed, inversions and limits.
    Setting, e.g. for 2-step mode
    2 analog inputs for sensors or setting signals:
    Analog input E1 and E2: Setting by operating modes or manually programmable, e.g. 0-10 V, 0-20 mA, 4-20 mA
    Analog input E2: programmable, e.g. comparison with sensor 1, difference to sensor 1, average value formation, setpoint setting, setpoint adaptation (e.g. outside temperature dependent), activation of 2nd control circuit
    2 digital inputs D1 and D2:
    Programmable, e.g. enable, switchover setpoint 1 or 2, switchover control or manual mode, switchover E1 or E2, invert control function, output limitation, display of external fault, reset, direction of rotation reversal
    1 analog output A1:
    Setting by operating modes or manually programmable, e.g. output signal proportional to modulation, output signal proportional to input signal, invertible, 10 V constant voltage, group control, activation as output for 2nd control circuit
    Standard conformity
    Interference emission according to EN 61000-6-3 (domestic)
    Interference immunity according to EN 61000-6-2 (industrial)